Home  Products Coordinate Measuring Machines Vertical CMMs Micro-Hite DCC
|
 The Brown & Sharpe Micro-Hite® DCC, (Direct Computer
Control) coordinate measuring machine is the perfect addition to any
operation that requires additional inspection capacity or faster
inspection cycle time.
The Micro-Hite DCC is a competitively priced, high speed, high
accuracy, entry level automated measuring machine that can handle
virtually any measurement and inspection application. Use it as a
walk-up station for first piece and layout inspection, for machine tool
setup or as a flexible gage to control manufacturing processes. Its
17" x 19" x 15.5" (440 mm x 490 mm x 390 mm) measuring volume
accommodates 80 percent of parts manufactured today, making the
Micro-Hite DCC a practical addition to any shop.
The Micro-Hite DCC incorporates an advanced belt drive system that
gives it an acceleration five times faster than similar CMMs, reducing
inspection cycle time to a fraction of that of higher priced machines.
Thermally compatible materials and components minimize the influence of
ambient temperature on measurement results, making the Micro-Hite DCC
the perfect measuring system for virtually any application.
Make your manufacturing operations more efficient with the affordable MICRO-HITE DCC.
Streaming Video: Micro-Hite DCC in action
- Micro-Hite DCC CMM
- Machine Stand
- Control System
- TESASTAR Touch Trigger Probe
- Calibration Sphere
- Computer System & Monitor
- PC-DMIS PRO Measurement Software
- PC-DMIS PRO Software Training
- Installation and On-site Performance Verification
- On-line User's and Software Manuals
- One (1) Year System Warranty with Telephone Applications Support
Probing Options
- TESASTAR-I Manual Indexable Probe
- MH20 Manual Probe
- MH20i Manual Probe
- PH10T Automatic Wrist with TP20 Probe
- Hand Control Unit for PH10 Wrist
- Styli Kits
- Stylus Changer Rack
Software Options
- Upgrade to PC-DMIS CAD or CAD++
- Display CAD Option for PCDMIS PRO
- PCDMIS Sheet Metal Option (available with PRO and CAD)
- PCDMIS Direct CAD Interfaces (DCIs)
- PCDMIS Direct CAD Translators (DCTs)
- PC-DMIS CAD or CAD++ Offline
- DataPage SPC
Environmental Options
Machine Options
- Computer Table
- Printer
- Computer Upgrades
Design features
- Tricision® technology controls bridge axis roll for precise volumetric measuring accuracy.
- Patented glass scales and non-contact opto-electronic sensors provide high accuracy and repeatability to 2 µm.
- Lightweight, offset triangular bridge is designed with a low center of gravity and an optimum stiffness-to-mass ratio for improved positioning accuracy.
- Wide bearing separation assures optimum control of bridge axis roll for precise volumetric measuring accuracy.
- Computer design techniques, including Finite Element Analysis (FEA) and Modal Analysis, reduce structural deflection and the effects of vibrations/ thermal variations on machine performance.
- Large measuring range of 17" x 19" x 15.5"
Environment
- Quality Lab or Controlled Workshop
Performance Data
- Brown & Sharpe tests and evaluates CMM products using the American standard ASME B89 and international standard, ISO 10360-2, and ISO 10360-4.
- Please visit the About ISO Standards page for ISO Standard information.
- To request performance information on this model Click Here
The Micro-Hite DCC is available in the following sizes:
Strokes (X,Y,Z)
|
|
|
Brown & Sharpe
is a brand of:
Hexagon Metrology, Inc.
250 Circuit Drive
North Kingstown, RI 02852
Toll Free Phone: 800.343.7933
Phone: 401.886.2000
Fax: 401.886.2727
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
|
|
|
