Home  Products Coordinate Measuring Machines Horizontal CMMs Prima C1
|
Prima C1 offers state of the art performance and cost-effective
flexible gaging of large–volume workpieces for manufacturing support.
The quality of design and unique mechanical structure, makes Prima C1 a
high-performance Direct Computer Control, (DCC) system.
The Prima C1 is designed for easy operation within most operating
conditions. Its open architecture design allows complete access and
facilitates effortless material handling. A three-point worktable
support design eliminates the need for costly foundations. The rugged
construction is combined with a built-in linear thermal compensation
system for reliable operation within production environments.
Prima C1 can be equipped with a high-performance CW43L servo wrist,
laser sensors, continuous scanning probes, and an assortment of probes
/ styli changers. It is available in single arm configuration, and
side-mounted to system base plate. Prima C1 can be equipped with the
patented FIVE U-nique flexible fixturing system permitting program
driven configuration for highly accurate part holding fixtures. The
modular concept of FIVE U-nique allows accurate fixture construction to
accommodate an unlimited number of work piece configurations.
- Prima C1 Single Arm Base Machine with Integral Cast Iron Measuring Plate
- Control System
- Probe Head PH10M
- TP6
- Lightweight Extension Kit (50-, 100-, and 200 mm)
- Styli Kit
- Calibration Sphere
- Computer System, Monitor, Printer, Table/Workstation
- PC-DMIS PRO
- DataPage R/T Statistical Process Control Software
- Installation and On-site Performance Verification
- On-line User's and Maintenance Manuals
- PC-DMIS PRO Software Training
- Scanning probe ready
Probing Options
- CW43L Continuous Rotary Head
- Analog Scanning Sensor
- Metris Laser Scanning Sensor
Software Options
- Upgrade from PCDMIS PRO to PC-DMIS CAD++
- PC-DMIS Offline Packages, if ordered with a new machine:
- PC-DMIS CAD Offline
- PC-DMIS CAD++ Offline
- DCC Scanning Option (available with PRO and CAD)
- Display CAD Option
- PCDMIS Sheet Metal Option (available with PRO and CAD)
- Upgrade to PC-DMIS CAD Software
- Direct CAD Interfaces (DCIs)
Environmental Options
- Refrigerated Air Dryer
- Bellows Covers Kit
Machine Options
- Disengageable Drives
- Worktable Threaded Holes
- Worktable T Slots, 3 Total
Design features
- Open architecture design allows complete access and facilitates effortless material handling.
- Worktable support system eliminates the need for costly foundations.
- Rugged construction is combined with a built-in linear thermal compensation system for reliable operation within production environments.
Environment
- Nominal Temperature: 20 °C ± 4.0 °C (68 °F ±7.2 °F)
Performance Data
- Brown & Sharpe tests and evaluates CMM products using the American standard ASME B89 and international standard, ISO 10360-2, and ISO 10360-4.
- Please visit the About ISO Standards page for ISO Standard information.
- To request performance information on this model Click Here
The Prima C1 is available in the following sizes:
- 20.12.16
- 20.14.16
- 30.14.16
- 30.16.21
- 40.16.21
|
|
|
Brown & Sharpe
is a brand of:
Hexagon Metrology, Inc.
250 Circuit Drive
North Kingstown, RI 02852
Toll Free Phone: 800.343.7933
Phone: 401.886.2000
Fax: 401.886.2727
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
|
|
|
